Jelajahi Lengkapnya — Film Vinly Colored
VinylFrog

Glossy Metallic Rubellite Purple Color PPF (Paint Protection Film)

Harga belum dipublikasikan — tanyakan langsung via WhatsApp.

Ukuran / Varian

Product Description

Glossy Metallic Rubellite Purple Color PPF is a gloss purple paint protection film that carries the color change and the chip protection in one layer, replacing a colored wrap with clear PPF over the top. The color is red-violet, a magenta-leaning plum, held in a 17 micron pigment layer between two thermoplastic polyurethane films for an installed build near 192 microns against about 150 for a vinyl wrap

Features

  • Premium TPU material: Provides durable protection against rock chips, road debris, scratches, and UV damage.
  • Heat-activated self-healing topcoat: Helps repair minor scratches and swirl marks with heat from sunlight, warm water, or a heat gun.
  • High-gloss top coat: Delivers a smooth glossy finish while enhancing color depth and appearance.
  • Hydrophilic surface: Helps water spread evenly across the surface for easier cleaning and reduced water spotting.
  • Dry-apply installation: Designed for easier application with a repositionable adhesive system.
  • Heat and UV resistant: Helps maintain long-lasting color and performance under various weather conditions.
  • Long-lasting durability: Designed to provide reliable protection for 3–5 years depending on climate and usage.

Specifications

  • Color: Rubellite Purple.
  • Finish: Glossy Metallic.
  • Application Method: Dry Application.
  • Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, 49ft and 59ft.
  • Packaging: Roll.

Video

Things You Should Know:

Best Paint Protection Film (PPF)

How To Apply Paint Protection Film 

PPF Vs Vinyl Wrap

How Long Does Paint Protection Film Last?

How Much Does Paint Protection Film Cost?

Structure

Functions


Recommended Uses

▲ Standard Size & Appearance

Classification Unit Specs Remarks
Thickness Top protected film um 50±5% PET
Self-healing Layer um 10±5% /
Face Film um 60±3 Thermoplastic Polyurethane
Color Layer um 17±0.5 /
Base Color Layer um 70±0.5 Thermoplastic Polyurethane
Acrylic Adhesive um 35±2% Solvent-based
Release liner um 75±5% Satin Semi-transparent White
Width m 1.52±0.01% 4.98ft
Length m 15±1% 49.21ft

 

Physical properties 

▲ General Properties

Features Test Method/Conditions Data
Gloss(60°) GB 8807 ≥90
Water Contact Angle DL/T864 Appendix A ≥90°
Hardness GB/T 6739 ≥85A
Elongation at Break GB/ T1040 ≥350%
Coating Elongation at Break GB/ T1040 ≥85%
Tensile Strength GB/ T1040 ≥18 (mpa)
Initial Adhesion FTM 9 ≥ 8N/25mm
24h 180° Peel Force GB/T 2792 ≥ 12N/25mm
Storage Aging Peel Force GB/T 2792 ≥ 10N/25mm
Application Aging Peel Force GB/ T2792 ≥ 16N/25mm
Peel Force GB/ T2792 ≤ 0.3N/25mm
Dimensional Stability (MD) FTM 14 ≤ 0.5mm
Dimensional Stability (CD) FTM 14 ≤ 0.4mm
Chemical Resistance (Detergent) Naturally dried No Marks
Scratch Repair (0.1mm) Copper brush&Heat gun Repair Time≤ 3minutes
Stain Resistance GB/T 16422.2 No visible water stain deposits
Hydrolysis Resistance QC/T 1171-2021 stable for over 200h
Acid & Alkali Resistance Exposure to 10% hydrochloric acid and 0.1 mol/L sodium hydroxide solution for 24h No visual coating defects
Yellowing ΔE QUV Method 2000h ≤2
Application Termperature / +20℃ to +30℃
ServiceTemperature / -50℃ to +110℃
Recommended Shelf Life 15-25°C or 59-77° F and 45-50% Humidity 2 years

 

Warranty & Installation Guidelines

  • Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
  • Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
  • Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
  • Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
  • Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.

Recommendations

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.

Durability:

The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.

CAUTION!

 1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping. 

 2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.

3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.

Produk Terkait



13 In 1 PPF Installation Tool Kit — 1

13 In 1 PPF Installation Tool Kit


Glossy Metallic Black Rose Color PPF (Paint Protection Film) — 1

Glossy Metallic Black Rose Color PPF (Paint Protection Film)


Matte Performance Graphite Color PPF (Paint Protection Film) — 1

Matte Performance Graphite Color PPF (Paint Protection Film)


Matte Performance Graphite Color PPF (Paint Protection Film) — 1

Matte Performance Graphite Color PPF (Paint Protection Film)

Chat dengan Kami