VinylFrog Midnight Purple is a deep, rich purple that shifts to indigo as the light changes. In the shade, it reads almost black. In direct sun, the indigo comes forward and the metallic flake catches the surface. It is subtle enough to pass as dark but interesting enough to stand out when the light hits it.
The hydrophilic surface repels water and dirt. Cleaning takes seconds. The film eats rock chips and road debris so your factory paint never has to.
Features
Smooth glossy metallic color finish:deep purple that shifts to indigo with a high-gloss shine
Durable TPU material:high-performance protection against rock chips, road debris, and daily wear
Self-adhesive film:bonds directly to factory paint with no extra glue or primer needed
Heat-activated self-healing topcoat:erases minor scratches and swirl marks with a heat gun, hot water, or direct sun
Hydrophobic surface:repels water, mud, and stains. UV resistant. Will not yellow or fade
Supreme surface protection:shields your paint from damage while keeping the finish flawless
Scratch-resistant and anti-corrosion:stands up to road salt, harsh weather, and light abrasion
Heat and UV resistant:no yellowing, no orange peel, no cracking over time
Acrylic-based robust adhesive:strong bond that does not lift at edges. Lets you slide and reposition during install
Easy to slide and reposition:adjust the film while you lay it down. Press firmly when position is right
Specifications
Color: Midnight Purple.
Finish: Glossy Metallic.
Application Method: Dry Application
Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, 49ft, and 59ft.
Exposure to 10% hydrochloric acid and 0.1 mol/L sodium hydroxide solution for 24h
No visual coating defects
Yellowing ΔE
QUV Method 2000h
≤2
Application Temperature
/
+20℃ to +30℃
Service Temperature
/
-50℃ to +110℃
Recommended Shelf Life
15-25°C or 59-77° F and 45-50% Humidity
2 years
Time limits
Must use it within 3 months after receiving the wrap film
3 months
Warranty & Installation Guidelines
Warranty coverage:VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
Sole remedy:If a product does not conform, VinylFrog will either replace it or refund the purchase price.
Installation environment:Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
Installation steps:Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
Post-installation care:For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools:Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary. Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps. Aftercare: PH neutral. Avoid wax or solvents.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.